manualshive.com logo in svg

fetatrack 360, User Manual

Share
Download
fetatrack 360 User Manual Download Page 27

f

etatrack 360is  issue 1 

26 

WARRANTY 

 

Terms and Conditions 

 

1. The Warranty 

 
Ultrasound Technologies Ltd warrants the product, when new, to be free of defects 
in material and workmanship and to perform in accordance with the manufacturer’s 
specification for a minimum period of three years from the date of purchase from 
Ultrasound Technologies Ltd or its authorized agents. 
 
 

2. Replacement of Product or Components 

 
Ultrasound Technologies Ltd will repair or replace any components found to be 
defective or at variance from manufacturer’s specification at no cost during the 
warranty period. 
 

3. Return of a Faulty Product 

 
It shall be the purchaser’s responsibility to return the product directly to Ultrasound 
Technologies Ltd or to and authorized Ultrasound Technologies Ltd distributor, 
agent or service representative. 
 

4. Procedure for Return 

 
In order to return the product directly to Ultrasound Technologies Ltd the purchaser 
must first obtain a return authorization number from  Ultrasound Technologies Ltd’s 
Service Centre. 

 

5. Condition of Products for Return 

 
All products must be returned in a clean, decontaminated condition. Ultrasound 
Technologies Ltd reserves the right to refuse to service equipment returned in an 
contaminated condition. 
 

6. Exclusion from the Warranty 

 
This warranty does not include breakage or failure due to tampering, misuse, 
neglect, accident or shipping, nor the effects of normal wear and tear. 
 

7. Negating the Warranty 
 

This warranty is also void if the product is not used or serviced in accordance with 
the manufacturer’s instructions or has been repaired by any person other than a 
Ultrasound Technologies Ltd authorized agent. 
 
 

Summary of Contents for 360


































Reviews:

No comments

Brands by name

Popular brands

Load more brands