1/3
530/01
1
3
2
Routing circles using the MFS
routing template
Description
By using the MFS 400 or the MFS 700 templates, radii (1), round cutouts (2)
and circles (3) can be made easily and quickly.
Applications:
loudspeaker enclosures, transparent cutouts, counters,
wash basins, ...
The largest radius that can be routed, depending upon the particular MFS,
can be found from the table. However, the cutter dia. and the type of radius
that is to be produced must be taken into consideration!
A
No. 530
MFS 400
Reference dimension
(mm)
Calculation
Max. outer radius
306
306 + cutter diameter / 2
Max. inner radius
306
306 – cutter diameter / 2
Max. outer radius
37
37 + cutter diameter / 2
Min. inner radius
37
37 – cutter diameter / 2
MFS 700
Reference dimension
(mm)
Calculation
Max. outer radius
606
606 + cutter diameter / 2
Max. inner radius
606
606 – cutter diameter / 2
Max. outer radius
37
37 + cutter diameter / 2
Min. inner radius
37
37 – cutter diameter / 2
Example:
For a 12 mm dia. router
bit, the following radius values are
produced:
MFS 400
MFS 700
Max. radius (mm)
Outer
312
612
Inner
300
600
Min. radius (mm)
Outer
43
43
Inner
31
41
