background image

8

The grinding disks and the tool-holding fi xture on 
the appliance are equipped with a positive holder 

[6-1]

 Make sure the grinding disk is 

correctly positioned before screwing it tight. 

Working with the tool 

 Never overload the tool by using 

too much pressure! The best sanding results are 
achieved when applying moderate pressure. 
The ETS 150/3 EQ gives the best surface quality 
and low abrasion. The ETS 150/5 EQ provides high 
abrasion with good surface quality. The sanding 
performance and quality depend mainly on the 
choice of the right sanding material. Festool offers 
the appropriate sanding material for all applications 
(see Festool catalogue or on the Internet under 

www.festoolusa.com

). 

For safe guidance, hold the machine with both 
hands on the motor housing 

[7-2]

 and on the gear 

head 

[7-1]

We recommend the following settings on the rotary 
control 

[2-3]

 for electronic machines:

5 - 6

•  sanding with max. drive
•  sanding old paint
•  sanding wood and veneer prior to painting
•  interim sanding of paint on surfaces

4 - 5

•  sanding of thinly applied primer
•  sanding of wood with sanding vlies
•  sanding edges on wooden parts
•  smoothing primed wooden surfaces.

3 - 4

•  sanding full wooden and veneer edges
•  sanding in the grooves/rebates of windows and 

doors

•  interim paint sanding on edges
•  pre-sanding natural wood windows with sanding 

vlies

•  smoothing wood surfaces with sanding felt prior 

to staining

•  rubbing down stained surfaces with sanding vlies
•  rubbing down or removing excess lime paste with 

sanding vlies

7-2

7-1

7

6-1

6

Summary of Contents for ETS 150/3 EQ





























Reviews: