9
8
Sanding base brakes
The sanding base is braked by a collar (2.2) in
order to prevent any uncontrolled excessive
speed of the sanding base.
Because the collar wears down in the course of
time, it has to be replaced by a new one
(order no. 453 388) as soon as there is any
reduction in the braking effect.
9
Maintenance and care
Always remove the plug from the mains
supply socket before carrying out any
work on the machine!
The cooling air vents on the motor housing must
always be free of blockages and clean to ensure
air circulation.
Any maintenance or repair work requiring the
motor housing to be opened may only be
carried out by an authorised service workshop.
10
Warranty
Our equipment is under warranty for at least
12 months with regard to material or production
faults in accordance with national legislation.
In the EU countries, the warranty period f is 24
months (an invoice or delivery note is required
as proof of purchase).
Damage resulting from, in particular, normal
wear and tear, overloading, improper handling,
or caused by the user or other damage caused
by not following the operating instructions, or
any fault acknowledged at the time of purchase,
is not covered by the warranty.
Complaints will only be acknowledged if the
equipment has not been dismantled before
being sent back to the suppliers or to an
authorised Festool customer support workshop.
Store the operating instructions, safety notes,
spare parts list and proof of purchase in a safe
place.
In addition, the manufacturers current
warranty conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as
a result of ongoing research and development
work.
Seen at Ideal Tools.
Summary of Contents for ES 150/3 EQ
Page 3: ...Seen at Ideal Tools...
