Festool DTS 400 REQ, Instruction Manual

Page: 14 / 40

14
Edge protector [6]
The edge protector [1-6] prevents the sanding pad
circumference from coming into contact with a sur-
face (e.g. when sanding along a wall or a window),
thus preventing back-kick of the machine, or ma-
chine damage.
Working with the machine
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Work in corners and on edges tends to subject
the tip to increased stress and results in in-
creased heat development. In such cases, work
with reduced contact pressure.
– Hold the machine with one hand on the handle
[1-9] .
For sanding, we recommend the following settings
for the adjusting wheel
[1-3] :
6
DTS 400 REQ
1
2
6
DTS 400 REQ
1
2
2
1
WARNING
Risk of injury

Always secure the workpiece in such a manner
that it cannot move while being machined.
Sanding work Adjusting
wheel set-
ting
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered surface
prior to paintwork
– Intermediate sanding of paintwork on sur-
faces
5 - 6