31
Original operating manual GB
control or improve existing functions is
available, a Bluetooth connection to the
Festool app can be established.
Press the connection button on the re-
mote control
[1-1]
until the LED display
[1-2]
flashes blue.
The retrofit receiver module is ready
for connection for 60 seconds.
Follow the instructions provided in the
Festool app.
Connecting a remote control to the mo-
bile dust extractor
If the remote control and the retrofit
receiver module are provided, the
connection between the devices has
been preset and you can skip this
step.
To be able to connect a remote con-
trol to another mobile dust extractor,
the remote control must be reset
(see chapter on trouble shooting).
Activate the mobile dust extractor's au-
tomatic mode.
Press the connection button on the ret-
rofit receiver module
[2-1]
until the
LED display rapidly starts to flash
[2-2]
.
The retrofit receiver module is ready
for connection for 60 seconds.
Follow the instructions provided in the
Festool app.
Press the MAN button
[1-3]
on the re-
mote control.
The remote control is permanently
stored in the retrofit receiver mod-
ule.
Summary of Contents for CT-F I
Page 2: ...1 1 1 2 2 1 1 3 CT F I CT F I M 1 5 1 4 2 2 1 2 Ø 36 Ø 27 ...
Page 3: ...CT F I 3 ...
Page 4: ...CT F I M 4 1 2 3 4 ...
Page 5: ...45 45 CT F I 5 1 2 3 ...
