33
Original operating manual GB
Replace the battery.
Close the battery compartment.
6.3 Battery pack
Connecting the battery pack to the mo-
bile dust extractor
Activate the mobile dust extractor's au-
tomatic mode (see the operating in-
structions for the mobile dust ex-
tractor).
Should you have used the cordless pow-
er tool already, ensure that the battery
pack's capacity indicator has gone out
so that you can connect it (in certain
cases this can take a few seconds).
Press the connection button on the mo-
bile dust extractor
[2-1]
or on the re-
mote control
[1-1]
once.
The LED on the mobile dust ex-
tractor shows a slowly rotating
flashing blue light and the mobile
dust extractor is ready for connec-
tion for 60 seconds.
Switch on the cordless power tool.
The mobile dust extractor starts up
and the battery pack is connected
until the mobile dust extractor is
manually switched off.
If a second battery pack is connected
to the mobile dust extractor, the con-
nection to the first battery pack is
lost.
Summary of Contents for CT-F I
Page 2: ...1 1 1 2 2 1 1 3 CT F I CT F I M 1 5 1 4 2 2 1 2 Ø 36 Ø 27 ...
Page 3: ...CT F I 3 ...
Page 4: ...CT F I M 4 1 2 3 4 ...
Page 5: ...45 45 CT F I 5 1 2 3 ...
