Festool 576121, Original Instructions Manual

Page: 19 / 143

Contents
1 Symbols..................................................... 19
2 Safety warnings.........................................19
3 Intended use..............................................22
4 Technical data........................................... 22
5 Machine features...................................... 22
6 Operation...................................................23
7 Settings......................................................23
8 Working with the electric power tool........25
9 Service and maintenance..........................26
10 Accessories............................................... 27
11 Environment.............................................. 27
12 General information..................................27
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools!
Wear a dust mask.
Wear protective goggles.
Do not dispose of it with domestic
waste.
Safety class II
Direction of rotation of saw and the
saw blade
STOP
Electro-dynamic run-down brake
Tool contains a chip which stores data.
See section 12.1
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Tip or advice
Handling instruction
Risk of pinching fingers and hands!
Danger area! Keep hands away!
Pull out the mains plug
Connecting the mains power cable
Disconnecting the mains power cable
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2
Safety instructions for specific circular
saws
Cutting procedures
–
DANGER: Keep hands away from cut­
ting area and the blade. Keep your second
hand on auxiliary handle, or motor hous­
ing. If both hands are holding the saw, they
cannot be cut by the blade.
– Do not reach underneath the workpiece.
The guard cannot protect you from the
blade below the workpiece.
– Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
English
19