Festo YXCL, Operating Instructions Manual

Page: 23 / 56

Festo — YXCL — 2021-07b
Assembly
23
EHMY-LP-ELGC- 60 80
Y1
1)
[mm] EHMY-...-BS: Hy – 9.5
EHMY-...-TB: Hy + 6 EHMY-...-BS: Hy + 18.5
EHMY-...-TB: Hy + 40
Y2
2)
[mm] Y1/(n – 1)
Y3 [mm] 40
Y4 [mm] 30 … 80
Z1 [mm] 106 ± 6 125 ± 6
Z2 [mm] 40 ± 5
G1 M5 M6
Thread depth G1 [mm]
³
8
³
12
G2 M8
1) Hy = stroke in Y-direction
è
Technical data
2) n = number of mounting components
Tab. 8: Dimensions for adjusting kit for EHMY-LP-ELGC
Flatness Dimension Y1 [mm]
£
1000 1001 … 2000 2001 … 3000 3001 … 4000 4001 … 5000
[mm] 0.1 0.2 0.3 0.4 0.5
Tab. 9: Required evenness of the mounting surface
1. Determine the value of dimension Y1.
2. Check that the mounting surface has the required flatness and vertical alignment.
3. Prepare the mounting holes on the mounting surface in accordance with the product dimensions.
If necessary: move the adjusting kits and change dimension Y2 accordingly.
6.4 Application of adjusting kit
This chapter describes the basic application of the mounting component.
Mount and align the product according to the delivery status:
• For delivery status "partially mounted":
è 6.5 Product assembly with “partially mounted” delivery
status.
• For delivery status "completely mounted":
è
6.6 Product assembly with delivery status "com-
pletely assembled".