Festo — PDAD — 2022-02i
Assembly
15
All 3 output openings can be used. Festo recommends connecting a check valve to every output in use.
Only one input port may be used.
3
2
1
Fig. 4: Multi-way distributor - configuration of
standard design
1
Input side
2
Output side
3
Display of flow direction display (arrows)
1
2
3
Fig. 5: Multi-way distributor - installation in
corners
1
Input side
2
Output side
3
Flow direction (arrows)
Changing connections for input and output
This arrangement of the connections can be reversed by moving the multi-way distributor in the cover
of the adsorption dryer. If the input is required on the right side and the output on the left side, the
multi-way distributor must be rotated.
