Festo MSE6-E2M, Operating Instruction

Page: 22 / 84

22 Festo — MSE6-E2M — 2022-08d
Functions
Data field / function Input word
1)
Output word
1)
Flow measurement
Measured value Em.0 –
Consumption measurement
Measured value Em.1 –
Function status Em.3 –
Control/operation – Am.0
Pressure measurement
Measured value Em.2 –
Pressure change measurement
Measured value with selectable input data
è
5.2.3 Selectable input data function.
Blocking function
Function status Em.3 –
Input data – Am.0
Selectable input data
Input address Em.4 Am.1 è 5.2.3 Selectable input
data function.
Input data Em.5 –
1) m = module number 1
Tab. 3: Overview of input data and output data
5.2.2 Description of the input data and output data
–
The input words and output words of all input data and output data are shown in the Motorola
format, MSB-LSB. If the control system uses a different byte order, this must be taken into account
in the user program.
–
The input words, 2 bytes, 16 bits, are sent to the higher-order controller.
–
The output words, 2 bytes, 16 bits, are sent from the higher-order controller.
5.2.2.1 Output word Am.0 module control
The consumption measurement and the blocking function are controlled in the Am.0 output word.
Data format of output word 16 bits, right-justified
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
B15 B14 B13 B12 – – – – B7 B6 B5 B4 B3 B2 B1 B0
MSB LSB
Abbreviations used
B0 Shut-off valve controller
B1 Auto blocking