Exhausting and output of an error message at NECA-…-MP3:
–
EN1 and EN2 = 0 V (LOW)
–
EN1 and EN2 = 24 V (HIGH)
Exhausting and output of no error message at NECA-…-MP5:
–
EN1 and EN2 = 0 V (LOW)
–
EN1 and EN2 = 24 V (HIGH)
The following diagrams shows the exact switching characteristics of the Enable signals EN1 and EN2
with time offset. The maximum reaction time can be derived from the delay between the two signals.
EN2 before EN1 (for multi-pin plug socket NECA-S1G9-P9-MP3/-MP5)
1 EN2: Enable signal 2
2 EN1: Enable signal 1
3 Signal contacts
Fig. 24 Runtime performance of enable signals with NECA-…-MP3/-MP5
Maximum reaction time from exhausting to pressurisation: t2 + t1 = 75 ms + 5 ms = 80 ms
Maximum reaction time from pressurisation to exhausting: t3 + t4 = 15 ms + 2 ms = 17 ms
EN1 before EN2 (for multi-pin plug socket NECA-S1G9-P9-MP3/-MP5)
1 EN2: Enable signal 2
2 EN1: Enable signal 1
3 Signal contacts
Fig. 25 Runtime performance of enable signals with NECA-…-MP3/-MP5
Maximum reaction time from exhausting to pressurisation: t2 + t1 + t4 = 75ms + 5ms + 2ms = 82ms
Technical Data
36
Festo — MS6-SV-...-E-10V24 — 2019-10d
