ERMB
Festo ERMB 2018-12a English
7
5
Fitting
Fitting mechanical components
S
Do not modify the settings of screws and threaded pins if there is no request to
do this in these operating instructions.
S
Fit the motor onto the rotary module in
accordance with the assembly instruc
tions for the kit recommended in the cata
logue.
Fitting the product
:
Note
External stops can cause the toothed belt to tear due to excessive forces.
S
Use only the motor controller for braking the ERMB.
S
Position the ERMB so that all the operating parts are accessible.
S
Fasten the ERMB with 4 screws and
2 centring sleeves (diagonal) or with the
aid of kits to the threaded holes
1
or
8
.
Fastening is possible on all six side sur
faces.
Fig. 3
Fig. 4
