Festo ELGC-BS-KF, Instructions & Operating

Page: 12 / 20

Fig. 9
Whenever waves form, retighten cover strip on both sides:
1. Loosen the screws [C]
è Fig.9.
2. Push the cover strip into the cover.
3. Tighten cover strip with a clamping element [B]
è
Fig.9.
Clamping element è www.festo.com/catalogue.
4. Tighten the screws. Tightening torque: size 32/45: 0.2 Nm; size 60/80: 0.8 Nm.
If the cover strip can no longer be retensioned:
•
Replace belt reversal devices and covering è www.festo.com/spareparts.
9.1 Cleaning
Do not clean the guide elements (e.g. guide rails).
•
Clean the outside of the product with a soft cloth. Do not use aggressive cleaning agents.
Service
12 Festo — ELGC-BS-KF — 2018-08c