Festo EGC-HD-TB, Operating Instructions Manual, Page: 15 / 22

EGC-TB-KF, EGC-HD-TB
Festo – EGC-TB-KF, EGC-HD-TB – 2017-11c English 15
10 Accessories
Designation Part number/type
Grease gun with needle-pointed nozzle
Nozzle, outlet axial
Nozzle, outlet radial
647958/LUB-1
1)
647959/LUB-1-TR-I
1)
647960/LUB-1-TR-L
1)
Roller bearing grease LUB-KC1 from Festo
1)
1) (
è
Spare-parts catalogue at www.festo.com/spareparts)
Tab. 7
11 Troubleshooting
Malfunction Possible cause Remedy
Squeaking
noises, vibrations
or the axis is not
running smoothly
The coupling is moun­
ted too tight
Comply with the permissible coupling spacing
dimensions
(
è
assembly instructions of the motor mounting kit)
Distortions Fit the EGC free of tension (evenness of the bearing
surface:
è
5 Installation)
Align the EGC so that it is exactly parallel to the second
axis
Grease the EGC (
è
8 Maintenance and care)
Modify travel speed
Incorrect regulator set­
tings
Change the regulator parameters
Roller bearing/bearing
guide defective
Send EGC to Festo for repair
Toothed belt worn Send EGC to Festo for repair
Slide does not
move
Coupling hub slipping Check mounting of motor mounting kit
(
è
assembly instructions of the motor mounting kit)
Loads too high Reduce mass of the effective load/travel speed
Mounting screws for
effective load too long
Observe max. screw-in depth
(
è
5.1.2 Installation of the effective load)
Slide travels bey­
ond the end posi­
tion
The proximity switches
do not react
Check the proximity switches, connections and con­
troller
Toothed belt
jumps off
Toothed belt preten­
sioning too low
Send EGC to Festo for repair
(
è
9 Repair)
Incorrect regulator set­
tings
Change the regulator parameters
Tab. 8