Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f
Assembly
13
5
Assembly
The bus node is mounted in an interlinking block of the CPX terminal.
1
2
3
Fig. 3: Mounting the bus node in an interlinking
block
1
Screws
2
CPX bus node
3
Interlinking block
–
Before working on the product, switch off the power supply and secure it against being switched on
again.
–
CPX-M-FB35/45 only permissible on metal linking.
Disassembly
1. Unscrew screws.
2. Carefully lift the bus node.
Assembly
1. Check seal and sealing surfaces and insert the bus node.
2. Screws must be placed so that the self-tapping threads are used. Tighten the screws by hand
cross-wise.
Tightening torque: 0.9 … 1.1 Nm.
Use suitable screws for the interlinking block.
• Plastic interlinking block: thread-grooving self-tapping screws.
• Metal interlinking block: screws with metric thread.