Festo CPX-CMAX-C1-1, Mounting, Installation And Diagnostics

Page: 36 / 176

2. F itti ng and p ne u ma ti c i ns t a ll a tio n
2 − 6
Fes to P . B E − C PX− CMA X−S Y S− EN en 0908N H
2.3 Installation of the drive and position measuring system
Use o n ly th e d riv e/d i s pl acemen t enc o de r c o mb i na tio ns
a pprov ed b y Fes to for th e CMA X .
Note
I n or de r to a voi d damage d u e to u nc u s hio ned m ov emen t
i n to th e end po s itio ns:
·
Use a ppropri a t e s ho ck abs or be r s .
·
De fi ne th e s oftw a r e end po s itio ns .
To a voi d damage to th e d i s pl acemen t enc o de r wh en th e
d i s pl acemen t enc o de r i s s hort e r th an th e d riv e s tro ke:
·
Li m it th e tr a v e l r ange with add itio na l end s top s .
T ab .2 / 1 s how s th e a pprov ed d riv e/d i s pl acemen t enc o de r
c o mb i na tio ns:
Drive Displacement encoder Sensor
i t f
Design Type Design, function Type
interface
Li nea r d riv e DG CI D i g it a l ( abs olut e ) I n t eg r a t ed
DGP (L) P ot en tio me t e r ( abs olut e ) ML O−PO T − TL F− ... CA S M −S−D 2 − R3
Cyli nde r
D NCI E nc o de r (i nc r emen t a l) I n t eg r a t ed CA S M −S−D 3 − R7
D NC P ot en tio me t e r ( abs olut e ) ML O−PO T − L WG− ... CA S M −S−D 2 − R3
D NCM P ot en tio me t e r ( abs olut e ) I n t eg r a t ed CA S M −S−D 2 − R3
Sem i − rot a ry d riv e DS MI P ot en tio me t e r ( abs olut e ) I n t eg r a t ed CA S M −S−D 2 − R3
T ab .2 / 1 : D riv e ov e rvi e w ( as of Au g u s t 2009)
F urth e r d riv es a r e i n pr e p a r a tio n .