Festo CPX-AP Series, Operating Instructions Manual

Page: 28 / 34

ID hex (dec) Message Description
Overvoltage in the load supply PL 24 V DC
Remedy – Check load supply PL.
02
|
01
|
013F
(33620287)
Overvoltage in the
load supply PL
24 V DC
Diagnost-
ic status Error
The startup parameter specified in the AP device descrip-
tion does not exist in the device or deviates from the spe-
cification.
Remedy – Check firmware version.
06
|
00
|
0109
(100663561)
Startup parameter
rejected by device
Diagnost-
ic status Error
The length of the start-up parameter in the device differs
from the specified length in the AP device description.
Remedy – Check firmware version.
06
|
00
|
010A
(100663562)
Start-up parameter
deviation in length
Diagnost-
ic status Error
Upper critical limit exceeded.
Remedy – Check parameters.
– Check sensor.
06
|
02
|
0136
(100794678)
Upper critical limit
exceeded
Diagnost-
ic status Error
Lower critical limit undershot.
Remedy – Check parameters.
– Check sensor.
06
|
02
|
0137
(100794679)
Lower critical limit
undershot
Diagnost-
ic status Error
Value range is exceeded or undershot
Remedy – Check parameters.
– Check sensor.
06
|
02
|
0138
(100794680)
Value range is
exceeded or under-
shot
Diagnost-
ic status Error
Parameter set invalid.
Remedy – Delete parameter set.
– Overwrite parameter set (save).
06
|
05
|
0062
(100991074)
Parameter set invalid
Diagnost-
ic status Error
Diagnostics
28 Festo — CPX-AP — 2019-06