Festo CPX-AP-I-8DI-M12-5P, Instructions & Operating

Page: 10 / 18

6 Assembly
• Assemble the module as outlined in the “Instruction manual for automation system
CPX-AP"
è 1.1 Applicable documents.
7 Installation
• Carry out the installation according to the "Instruction manual for automation system
CPX-AP"
è
1.1 Applicable documents.
8 Commissioning
• Commission the automation system CPX-AP in accordance with the "Instruction manual for auto-
mation system CPX-AP"
è 1.1 Applicable documents.
Behaviour of the display components of the module after error-free commissioning
[MD]
Illuminated green
Tab. 9 Behaviour of the LED displays of the module after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour:
è
Instruction manual for automation system CPX-AP
è 10 Diagnostics and fault clearance
9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Write access to the parameters is typically performed by the higher-level controller using the device
descriptions specific to the host system.
ID Parameter Instance-
s Data
type Access
1)
Arraysize
70 Part number 1 UINT32 ro
–
246 Fieldbus serial number 1 UINT32 ro
–
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 30
20000 Module code 1 UINT32 ro
–
Assembly
10 Festo — CPX-AP-I-8DI-M12-5P — 2019-06