Festo CPV..-GE-IL-... 0112b English
15
3
Fitting the connecting cables
3.1 Preparing the cables
Brief instructions are supplied with the QUICKON set
(order no. 175485). Please follow the instructions on pre-
paring the cables. You can then be sure that you have
created a reliable contact.
3.2 Connecting the cables
After preparing the cables proceed as follows:
1. Connect the prepared cables to the appropriate con-
nections of the valve terminal (Bus IN; Bus OUT; 24 V).
2. Turn the cable until the coded noses fit into the
grooves. The codes ensure the correct polarity.
3. Tighten the union nuts. The ends of the cores will then
be pressed into the piercing device and the insulation
will be cut. Reliable electrical contact will then be
made.
