Festo BAW-HSW-... 2018-12b English
10
To set the waiting position
1
(A)
1. Pressurise the swivel module of the HSW and, with a
delay, the actuating cylinder of the BAW-HSW.
2. Loosen the locking nut
1
of the shock absorber.
3. Turn the shock absorber (A) while at the same time
holding the lock nut in place until the desired position
is reached.
Note:
The shock absorber must project at least 1 mm, and
the lock nut must grip all threads.
4. Tighten the lock nut
1
(tightening torque
è
table in
the chapter Fitting “Mounting on the handling
module”).
