4
Addressing AS-i slaves
4.1 Connecting the AS-i addresser
We recommend the use of the Festo addresser ASI-
PRG-ADR, part no. 18959 with adapter cable part no.
18960 (or Siemens PSG).
4.2 Assigning/modifying AS-i addresses
Before connecting an AS-i slave to the bus, you must assign a
non-reserved AS-i address to each AS-i slave.
Set the desired address with the AS-i addresser. Permitted
range 1...31.
Please note the following:
••
factory setting of combi-socket address 00
••
ID code and IO code see type plate on combi-socket
••
the AS-i slave need not be parametrized
AA
AA
A
A
A
A
AA
AA
AA
AA
AA
AA
E
n
g
lis
h
ASI-M..-...-Z
14
9801b
