Festo 8060571, Repair Instructions

Page: 35 / 52

35 / 52 Festo 7ELCC_TB_KFb_en
5.4.1 Dismantling the cover strip
1. Unscrew the socket head screws (2x each) from the cover caps (2x) of the
slide module.
When removing the cover caps from the side module, secure the compres-
sion springs of the top belt reversals (2x) to prevent them from jumping off.
– The ELCC-TB-KF-60 has
one compression spring mounted on each top
belt reversal.
– The ELCC-TB-KF-70 / 90 / 110 has two compression springs mounted on
each top belt reversal.
2. Remove cover caps from the slide module.
3. Secure the compression springs.
4. Remove top belt reversals (2x).
5. Pull the cover plate from the slide module.
6. Unscrew grub screws (2x each) from the end cap (2x).
7. Pull the clamping plates (2x) with cover strip from the end cap.
8. Remove the clamping plates (2x).