Festo 548076, Repair Instructions

Page: 29 / 92

29 / 92 Festo 7DHTGd_en
3.8.1 Bill of materials DHTG-220- -A, series from F8 (from August 2015)
No. Designation, type
1 Flat head screw, DIN 921-M3×6-5.8
2 Clamping ring
3 Plate seal
4 Rail
5 Rail
6 Ball bearing
7 Bearing module
8 O-ring, 75×2
9 Plate
10 Spring pin, 3×12
11 O-ring, 6.5×1.6
12 Index plate
13 Cylindrical dowel pin, DIN 6325-8M6×16
14 Countersunk screw, DIN 7991-M6×16-8.8
15 Compression spring
16 Sleeve
17 Ring gear
18 Retaining ring, F-40×1.75
19 End cap
20 Wiper seal
21 O-ring, 35×2
22 O-ring, 2.2×1
23 Stop pin
24 Compression spring, D-001
25 Lock bolt
26 Bolt
27 Piston seal
28 Housing
29 Pinion
30 Metal sheet
31 Cover
32 Retaining ring, DIN 471-82×2.5
33 Flange
34 Cylindrical dowel pin, DIN 6325-6M6×12
35 Socket head screw, DIN 912-M6×12-10.9
36 Countersunk screw, DIN 7991-M6×20-8.8
37 Plate module
No. Designation, type
38 Sealing ring, OK-M3
39 Plug screw, B-M3-S9
40 Blanking plug, B-M3-S9-OK
41 Piston seal
42 Gear rack
43 O-ring, 52×2
44 O-ring, 11×1.5
45 O-ring, 5×1.5
46 Shock absorber module, YSRD-20-20-C
47 Retaining ring, J-26
48 O-ring, 3×1.5
49 O-ring, 26×2
50 Compression spring, D-055
51 Plate module
52 Socket head screw, DIN 912-M6×25-10.9
53 Stop screw, M14×1×19
54 Clamping component, DGSL-20
55 Sealing ring, OK-1/8
56 Plug screw, DIN 908-G1/8-ST
57 Blanking plug, B-1/8-OK
58 Stop screw, M14×1×…
59 Hollow bolt module, GRLA-1/8-QS-8-D
60 Pinion module
61 Lubricating grease LUB-E1, silicone-free
The new F8 series (from August 2015)
differs from the previous series only due to
an additional heavy-duty spring pin in the
plate (

www.festo.com/spareparts ).