IFMFS80/81
ENGLISH
I
INSTRUCTION MANUAL
By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making
products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other
authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and
protecting our health.
F) ZERO POSITIONING OF CHRONOGRAPH HANDS (after replacing the battery)
When resetting the chronograph after replacing the battery, if the chronograph second hand does not return to the 0 seconds
position or if the chronograph second hand has shifted out of position due to a strong impact, perform zero positioning of the
chronograph hands according to the procedure described below.
Chronograph Hand Zero Positioning
1. Pull the crown out to the time correction position.
2. Press button (A) to position the chronograph second at the 0 position.
* The chronograph second hand can be advanced rapidly by depressing button (A) continuously.
3. Once the chronograph second hand has been positioned at the 0 position, reset the time and return the crown to the
normal position.
4. Press button (B) to check that each of the chronograph hands has been reset to the 0 position.
RESET
STOP
TIME MEASUREMENT
E) USING THE CHRONOGRAPH
* When using the chronograph,begin timing after first making sure that the
chronograph minute hand has returned to the 00 minutes position.
* If the chronograph minute hand is not at the 00 minutes position, slowly
press button (B) until it returns to the 00 minutes position.
Chronograph Timing
This chronograph measures and displays time up to 30 minutes in 1second
units. Each of the chronograph hands stop when 30 minutes has elapsed.
Timing Procedure
1. Press button (A) to start timing.
* The chronograph is repeatedly started and stopps each time button (A) is
pressed.
2. Press button (B) to reset the chronograph to 0 seconds.
[Correct 00 minutes
position of chronograph
minute hand]
Chronograph
minute hand
Chronograph
second hand
