IFM0S90
IFM0S90
16
17
ENGLISH
USING THE CHRONOGRAPH
USING THE CHRONOGRAPH
The chronograph is able to measure and display time in 1/100 second united up to
maximum of 59 minutes 59 seconds 99.
[The chronograph 1/100 second hand]
•
The chronograph 1/100 second hand moves for 61 seconds after measurment is
started, after which time it will stop at 0 position. After that time, it then changes
to demonstration operation, making one revolution every minute.
[To start the chronograph]
•
Press button A.
•
The small second hand will advance to the zero position at the same time the
chronograph starts, and then begin to run as the chronograph second hand.
Passed at 1 minute and 1 second after the chronograph has been started:
•
The chronograph second hand will change over to running as the chronograph
minute hand.
[To stop the chronograph]
•
Press button A.
•
When the measured time is less than 61 seconds, the chronograph minute,
second and 1/100 second hands will stop at the measured time.
•
When the measured time is over 61 seconds, the chronograph minute and
second hands will stop at measured time. The chronograph 1/100 second
hand will remain stopped at the zero position. Read the seconds and minutes
from the chronograph at this time.
Next, press button A again to advance the chronograph 1/100 second hand to
the measured time.
Read the time in 1/100 seconds from the chronograph at this time.
[To reset the chronograph]
•
Press button B.
•
The chronograph second hand will change over to running as the second
hand for current time. The other chronograph hands are returned to the zero
position.
