3
4. Insert the carafe on warming plate horizontally and ensure that the center line of the carafe aligns with that of
funnel.
5. Plug the power cord into the outlet.
6. Pressing the switch down, the indicator will be illuminated. The appliance will begin working.
Note1: during brewing process you may remove the carafe to serve for duration of not exceeding 30
seconds and the coffee maker can stop dripping automatically. If the serve time exceeds 30 seconds
the coffee will overflow the funnel.
Note2: This unit has strength adjustment function, if you want to increase the coffee strength, you can
press and hold switch button for 4 seconds to start brewing, the indicator will flash constantly until
coffee brewing finish.
7. Upon completion of brewing coffee, that is one minute later after the coffee stops dripping out, you can remove
the carafe, pour and serve.
Note: the brewed coffee you get will be slightly less than the water you have added as some water is
absorbed by coffee powder. DO NOT touch cover, warming plate and so on when operating as they are
very hot.
8. When the process is finished, if you do not want to serve immediately, keep the switch on, the coffee can be kept
warm in the warming plate for 40 minutes and the appliance will be cut off automatically after 40 minutes. For an
optimum coffee taste, serve it just after brewing.
9. Always turn the coffee maker off and disconnect the power supply after use.
Note: Be careful when pouring the coffee out, otherwise you would be hurt as the temperature of
coffee just finished is high.
CLEANING AND MAINTENANCE
CAUTION: Always unplug the product from electrical outlet and allow the warming plate to cool
completely before cleaning it. Never immerse the unit or power cord into water or any other liquid for
cleaning.
1. Clean all detachable parts after each use in hot, sudsy water.
2. Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the area above the funnel and drip onto the product base during brewing. To
control the dripping, wipe off the area with a clean, dry cloth after each use of the product.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5. Replace all parts to their proper position on the coffee maker
and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits left by the
water according to the water quality in your area and the use frequency. We recommend decalcifying your coffee
maker as follows, using a solution of white vinegar and cold water. Solution of two tablespoons (30ml) white
vinegar in one carafe of cold water works best.
1. Fill the tank with the vinegar solution to the maximum level as indicated on water gauge.
2. Insert glass carafe onto the warming plate.
3. Make ensure paper filter (without coffee powder) and funnel are assembled in place.
4. Switch on the appliance and allow it to “brew” de-scaling solution.
5. After “brew” one-cup solution, switch off the appliance.
6. Let the solution stay for 15 minutes and repeat step 3-5.
7. Switch on the appliance and run off the solution until the water tank is completely empty.
Summary of Contents for CM1089-GS
