MACHINES AND
ACCESSORIES
Page 19 of 29
8.4 Press installation
Loss of stability / Fall
Choose a press assembly position such that:
the area is sheltered from weather and moisture;
the surface is perfectly flat, non-slip and non-deformable, with an appropriate load
capacity for the weight of the machine;
a work area free of obstacles and barriers can be fitted out around the machine;
It is positioned in a well lit area.
Proceed as follows to fasten the press to the ground:
1. Fasten the base support brackets to the floor in a stable and secure position, using the
fastening holes on the brackets themselves. Use appropriate fastening devices such as
bolts, dowels, etc.
2. Securely tighten the mounting bolts / grips.
8.5 Preliminary testing
Before using the press, it is necessary and essential to carry out a preliminary test in its place
of operation.
The test includes:
a general visual inspection of the machine to ensure there are no worn parts and/or
damage on the equipment itself, and that all components have been assembled
correctly;
checking the stability of the press;
testing machine operation by running a few complete cycles (for the whole stroke of
the pressing piston) free of load.
a verification that the vertical displacement of the pallet carrier functions properly.
fervi.com
