MEASURING
INSTRUMENTS
Page 3 of 5
1 WARNINGS
1. Before using the caliper clean the surface of the protective sticker using a clean, dry
cloth. To remove stubborn dirt, use a cloth lightly dampened with ethyl alcohol.
2. Conditions of use
Temperature:
5 – 40°C
Relative humidity:
less than 80%
3. Prevent the protective sticker from coming into contact with liquids containing water
that could damage the circuit board.
4. Do not allow any part of the digital caliper to come into contact with electric current
(e.g. impact with an electric pen) to prevent damage to the integrated circuits.
5. Remove the battery from its compartment when the caliper is not in use for a long
period of time.
2 DESCRIPTION OF THE INSTRUMENT
Figure 1 - Overview
1
Scale measurement face
8
Protective sticker
2
Internal measurement faces
9
Depth measurement bar
3
LCD screen
10
External measurement faces
4
Locking screw
11
ON/OFF button
5
1.5V button battery
12
Reset button
6
Battery cover
13
Measurement unit change button
7
Slider
fervi.com
