HARDWARE
Page 6 of 6
2.2 Identification
The following identification plate is located on the airbrush:
Figure 7 – Identification plate
3 IMPROPER USE AND CONTRAINDICATIONS
IT IS STRICTLY FORBIDDEN!
To use the airbrush for purposes other than those for which it was intended.
To use the airbrush in areas that carry a risk of fire or explosion.
To use solvents that may create a chemical reaction with the aluminium and zinc.
To lock the power lever in the open position.
To use the airbrush without the proper use of appropriate PPE.
To use the airbrush in the presence of children.
To point the spray of the airbrush at people and/or animals.
To smoke while using the airbrush
4 MAINTENANCE AND CLEANING
The compressed air connection must be kept clean and dry.
The paint outlet nozzle and all moving parts should be cleaned thoroughly after each time the
airbrush is used.
To clean, we recommend using a solvent and the brush supplied to remove paint residue and
thoroughly clean the nozzle.
Once you have finished cleaning with the solvent, rinse the parts with clean water and dry
thoroughly with a dry cloth.
Used nozzles must be replaced with equivalent nozzles.
Contact the Dealer's Customer Service Centre where you purchased the items to order spare
parts.
fervi.com