HARDWARE
Page 3 of 6
1 GENERAL SAFETY INSTRUCTIONS
1.1 Commissioning
Before using this airbrush, some simple assembly is required.
To properly assemble the airbrush, proceed as follows:
1. Screw on the compressed air connection and tighten it
firmly using a wrench for hex nuts.
Figure 1 - Quick coupling
2. Screw on the paint feed unit via the threaded hole,
located under the paint outlet nozzle and tighten it
firmly, with the aid of a wrench for hex nuts.
Figure 2 – Feed unit
3. The spray gun is equipped with a cup with bayonet lock,
it is therefore necessary to fit the pins (A) located on
the cup into the slots (B) of the feed unit, and then lock
the cup by means of the lever (C), in this way, it will be
perfectly sealed.
During the attachment of the cup, check that the seal
remains in place.
Figure 3 – Cup locking
A
B
C
fervi.com