HARDWARE
Page 11 of 16
Crushing and Cutting
Always be sure to insert the shaft of the grinding wheel into the hole of the tool chuck
by at least 10mm.
Always make sure that the tool is assembled correctly while trying to manually remove
it from the grinder.
If it is too short or incorrectly tightened, the grinding wheel may suddenly release and
may hit the operator in the face or chest.
Figure 6 – Mounting the tool
Assembling the Grinding Wheel
Always check that the grinding wheel is compatible with the pneumatic tool.
Check that the wheel is in good condition, i.e. no cracks and not completely worn out, before
operating.
Make sure the grinding wheel is fully inserted and locked into the tool chuck.
B
A
fervi.com
