MACHINES AND
ACCESSORIES
A
ll
rig
h
ts
a
re
res
er
ved
o
f rep
ro
du
ct
io
n
a
n
d
d
iss
em
in
at
io
n
o
f t
h
is
T
ec
h
n
ica
l M
an
u
al
an
d
d
o
cu
m
en
ta
tio
n
c
ited
a
n
d/o
r a
tta
ch
ed
. I
t i
s exp
res
sly
fo
rb
id
d
en
to
rep
ro
du
ce,
p
u
bli
sh
o
r
dist
ri
bu
te
an
y
in
fo
rm
at
io
n
fr
o
m
th
is
M
an
u
al.
C
op
yr
ig
h
t b
y
FE
R
V
I
2.3
Safety regulations regarding the electric system of machine-
tools
Risks associated with using the machine
1.
Do not modify the electrical system in any way. Any attempt in this regard may
jeopardize the operation of electrical devices, causing malfunction or accident.
2.
Work carried out in the electrical system of the machine must, therefore, be carried out
only by qualified and authorized personnel.
3.
If you hear unusual noises, or you feel something strange, immediately stop the
machine. Then carry out an inspection and, if necessary, perform any repairs as
required.
1.
The supply voltage must correspond to that stated on the identification plate and in the
technical specifications. Namely: 230 Vac / 50 Hz.
Never use any other type of power supply!
2.
The use of a circuit breaker on the electric power supply is recommended. For more
detailed information, contact a trusted electrician.
3.
The power socket must be equipped with a grounding lead. The size of any extension
cables must be equal to or greater than the one of the machine's own power supply
cable (diameter
1.5 mm
2
).
4.
The power supply cable (and its possible extension cable) should never come in contact
with hot objects, sharp edges, wet or oiled surfaces.
5.
The power supply cable (and its possible extension cable) should be checked
periodically, and before each use, for making sure they have no signs of damage or
wear. If these are not in good condition, do not use the machine and replace the
damaged cable.
6.
Do not use the power cord to detach its plug from the socket.
2.4
Technical Assistance
For any problems or concerns, please contact, without hesitation the Customer Service
Department of your dealer, who has competent and specialized staff, specific equipment and
spare parts.
2.5
Other provisions
I
T IS FORBIDDEN TO TAMPER WITH SAFETY DEVICES
The first thing to do when starting work is to check for the presence and integrity of the
protections and the operation of the safety devices.
If any defect is detected, do not use the machine.
Even more so, it is strictly forbidden to modify or remove guards, safety devices,
labels and indication signs.
fervi.com