Fervi 0560, Use And Maintenance Manual

Page: 8 / 26

MACHINES AND
ACCESSORIES
Page 8 of 26
2.2 Safety rules for electric machine-tools
Changes to the electrical system

Do not modify the machine's electrical system in any way. Any attempt to do so may impair the
operation of the electrical devices causing a malfunction or accident.

Work on the electrical system of the machine must therefore be carried out by authorised personnel
only.

If you hear unusual noises, or notice anything strange, stop the machine immediately. After performing
a check and, if applicable, the necessary repairs.
1.
The supply voltage must correspond to that stated on the plate and in the technical
specifications (230 V / 50 Hz). Do not use any other type of power supply.
2.
The use of a life-saving device on the electric power supply for a nominal trip range of
10 to 30 mA is recommended. For detailed information, contact your electrician.
3.
The mains socket must be double pole switched and grounded (10 / 16 A, 250 V), any
extension cords must have the same or greater cross sections than those of the
machine's power cord.
4.
Ensure that the power cord does not come into contact with hot objects, surfaces that
are wet, oily and/or have sharp edges.
5.
The power cable must be checked regularly and before each use to check for signs of
damage or wear. If not in a good condition, do not use the machine, and replace the
cable.
6.
Do not use the power cord to lift the machine or to remove the plug from the socket.
2.3 Technical support
For any problem or request for clarification, please do not hesitate to contact the Support
Service of the dealer where the machine was purchased, with its competent and specialised
staff, specific equipment and original spare parts.
2.4 Other provisions
The first thing to do when starting work is to check the presence and integrity of the guards
and the operation of the safety devices.
If any defect is encountered do not use the Bench chamfering machine!!
It is absolutely forbidden, therefore, to modify or remove guards, safety devices,
informative labels and plates.
fervi.com