Fervi 0560, Use And Maintenance Manual

Page: 19 / 26

MACHINES AND
ACCESSORIES
Page 19 of 26
7.4 Adjusting the Bench chamfering machine
To set the desired depth of chamfer, the adjusting screw (ref. 10
in figure 6) should be operated as follows:
1. unlock the adjustment screw by unscrewing the locking
knob (ref. 11 in figure 6);
2. rotate the adjustment screw (ref. 10), until the inserts of
the milling cutter touch the workpiece;
3. turn the screw until it reaches the desired depth (each
turn corresponds to approximately 0.5 mm);
4. once the depth of the chamfer has been determined, lock
the locking knob (ref. 11).
Figure 6 – Adjustment
commands
Adjustment of the Chamfering machine
Any adjustments must be performed with the machine stopped and NOT powered.
fervi.com