MACHINES AND
ACCESSORIES
Pagina 9 di 32
2.2 Safety regulations regarding the electric system of machine-
tools
Risks associated with using the machine
1. Do not modify the electrical system in any way. Any attempt in this regard may
jeopardize the operation of electrical devices, causing malfunction or accident.
2. Work carried out in the electrical system of the machine must, therefore, be carried out
only by qualified and authorized personnel.
3.
If you hear unusual noises, or you feel something strange, immediately stop the
machine. Then carry out an inspection and, if necessary, perform any repairs as
required.
1.
The supply voltage must correspond to that stated on the identification plate and in the
technical specifications. Namely: 230 Vac / 50 Hz.
Never use any other type of power supply!
2.
The use of a circuit breaker on the electric power supply is recommended. For more
detailed information, contact a trusted electrician.
3.
The power socket must be equipped with a grounding lead. The size of any extension
cables must be equal to or greater than the one of the machine's own power supply cable
(diameter
1.5 mm
2
).
4.
The power supply cable (and its possible extension cable) should never come in contact
with hot objects, sharp edges, wet or oiled surfaces.
5.
The power supply cable (and its possible extension cable) should be checked periodically,
and before each use, for making sure they have no signs of damage or wear. If these are
not in good condition, do not use the machine and replace the damaged cable.
6.
Do not use the power cord to detach its plug from the socket.
2.3 Safety rules for band saws
1. Check in advance, the proper tightness between the material to be processed and
clamp.
2. Do not move away from the machine until the blade and other moving parts, have
completely stopped. For this purpose, only use the stop controls to stop the machine.
2.4 Technical Assistance
For any problems or concerns, please contact, without hesitation the Customer Service
Department of your dealer, who has competent and specialized staff, specific equipment and
spare parts.
2.5 Other provisions
I
T IS FORBIDDEN TO TAMPER WITH SAFETY DEVICES
The first thing to do when starting work is to check for the presence and integrity of the
protections and the operation of the safety devices.
If any defect is detected, do not use the machine.
Even more so, it is strictly forbidden to modify or remove guards, safety devices,
labels and indication signs.
fervi.com
