MACHINES AND
ACCESSORIES
Page 4 of 27
1 INTRODUCTION
This manual is considered an integral part of the machine it was attached to at the time of
purchase.
The manufacturer holds all ownership to material and intellectual property of this manual;
any disclosure or copying, even partial, of this publication without prior written consent is
forbidden.
The purpose of this manual is to provide the knowledge necessary for the use and
maintenance of the machine
Paranco a leva Art. 0237/05, 0237/15
and create a sense
of responsibility and an understanding of the capabilities and limitations of the means
entrusted to the operator.
As the machine is entrusted to experienced and skilled operators, the following machine must
be perfectly known by the operator if you want it to be used safely and effectively.
Operators must be properly trained and prepared, so make sure that this manual is read and
consulted by the staff responsible for commissioning, operation and maintenance of the
Paranco a leva.
This is to make all operations the safest and most effective possible for
those who carry out these tasks.
Therefore, it is imperative to strictly comply with the requirements in this manual, a
necessary condition for safe and satisfactory operation of the machine.
Before starting operation, installation and use of the
Paranco a leva
, authorized staff must
therefore:
read this technical document carefully;
know which protections and safety devices are available on the machines, their location
and how they work.
The buyer is responsible for ensuring that users are properly trained, that they are aware of
all the information and instructions in this document and that they are aware of the potential
risks of operating the
Paranco a leva
.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
The
Paranco a leva
has been designed and built with mechanical guards and safety devices
designed to protect the operator/user from possible injury. It is strictly forbidden to modify or
remove guards, safety devices and caution labels. If this must be done (for example, for
cleaning or repair), make sure that no one can use the machine.
Modifications to the machines carried out by the user must be considered their sole
responsibility, therefore the manufacturer declines all responsibility for any damage
caused to persons and/or property resulting from maintenance performed by
unqualified personnel and in a manner different from the operating procedures
shown below.
fervi.com
