MACHINES AND
ACCESSORIES
Page 8 out of 12
4
COMMISSIONING
The winch is supplied in a cardboard box completely assembled, with the exception of the
operation handle.
Before disposing of the shipping carton, check you do not to throw away parts of the machine,
the owner's manual or other documentation
Standard packaging
Packaging materials (bags, cardboard, etc.). must not be left within reach of children as they
are a source of potential danger.
To assemble the handle, proceed as shown in the following figures:
1.
Mount the handle onto the rotation pin of the winch;
2.
Secure the handle in place by tightening the fastening nut with a wrench.
Figure 4
–
Installing the handle
The winch must be mounted on a suitable support structure, with adequate resistance
characteristics. This structure must be able to withstand the stresses resulting from operating
the winch (max pulling capacity 500 kg).
In this regard it would be possible for example to use the most robust parts or sections of the
chassis of motor vehicles or boats.
Check that the screws, plate and all the parts of the Winch are free of deformation or damage
prior to installation.
Secure the steel casing of the winch to the supporting structure, using the fastening holes on
the casing itself.
Mounting the Winch
ALWAYS check that the fastening screws of the Winch are fully tightened, before operating
with loads.
fervi.com
