24
GENERAL FEATURES
GENERAL RULES
EUROPEAN DIRECTIVES
• This manual and the wiring diagram supplied with the unit must be kept in a dry place and ready to hand for future
consultation when required.
• This manual has been compiled to ensure that the unit is installed in the correct way and to supply comprehensive
information about how to correctly use and service the appliance.
Before proceeding with the installation phase,
please carefully read all the information in this manual, which describes the procedures required to correctly
install and use the unit .
• Strictly comply with the instructions in this manual and conform to the current safety standards.
• The appliance must be installed in accordance with the laws in force in the country in which the unit is installed.
• Unauthorized tampering with the electrical and mechanical equipment will
VOID THE WARRANTY .
• Check the electrical specifications on the identification plate before making the electrical connections. Read the
instructions in the specific section where the electrical connections are described.
• If the unit must be repaired for any reason, this must only be done by a specialized assistance center recognized by
the manufacturer and using geuine spare parts.
• The manufacturer also declines all liability for any damage to persons or property deriving from failure of the
information in this manual to correspond to the actual unit in your possession.
• Proper uses: the fan fan coil is an appliance that treats the air in the room in both summer (Coil supplied
with cold water min . 6°C) and winter (Coil supplied with hot water max 85°C) .
IDENTIFICATION PLATE OF THE UNIT
The figure on the left depicts the identification plate of the unit.
A description of the data is given below:
Standard versions
A -
Trademark
B -
Model
B1-
Code
C -
Serial number
D -
Cooling Capacity
E -
Heating Capacity
F -
Power input in COOLING mode
G -
Power input in HEATING mode
H -
Reference standard
I -
Electric power supply
L -
Maximum load current
M -
Not compiled
N -
Shipping weight of the unit
O -
Sound pressure level at 1m
P -
IP Level Protection
Q -
Maximum pressure - water side
R -
Not compiled
S -
Not compiled
Codice
Code
B1
Rev
Ferroli Spa
Via Ritonda 78/A
(VR) Italy
RECEPTION
As soon as the unit arrives, it is essential to make sure that all the ordered items have been received and that
the shipment has not been damaged during transport. If damage is discovered, immediately notify the haulage
contractor and inform our customer management department at the same time. Only by acting in this way and
immediately will you be able to obtain the missing materials or reimbursement of damages.
The company hereby declares that the unit in question complies with the matters prescribed by the following Directives:
• Electromagnetic compatibility Directive
(EMC)
2014/30/EU
• Low voltage Directive (LVD)
2014/35/EU
•
ROHS
2011/65/EU
Any other Directives have to be considered not applicable.