Ferroli TIBER B 100, Instructions For Installation, Use And Upkeep

Page: 14 / 36

Continue to press the button. to enter the appointment mode
.
Press the mode key to switch to the countdown reservation mode, (6) light flashes.
Countdown reservation function, in the countdown reservation mode, the electric water heater will be
heated to the set temperature in advance according to the time point reserved by the user.
Countdown appointment mode: press 3S for a long time to enter the countdown appointment
setting, blink, enter the countdown setting, use and press the key to adjust the countdown.
After setting, press the mode key briefly to confirm. If no operation is performed for 5S in the
setting, it will be saved by defaultCurrent setting and exit the setting state. When the electric water
heater is powered off , it will exit the countdown appointment mode.
Continue to press the door button, the corresponding LED(7) light will go out, and exit the
appointment function.
10
APPOINTMENT FUNCTION
Activate this function by pressing the “-“ and “+”keys at the same time for 5 seconds Once activation
is confirmed, (1) light will flash rapidly for 5 seconds and then the light will Keep flashing.
To switch off the anti-Legionella function,repeat the previous steps(press”-”and “+” keys for 5
seconds) ; once deactivation is confirmed, The indicator( light 1) stops flashing and stays on.
This function can work in All modes
.