Ferroli TIBER B 100, Instructions For Installation, Use And Upkeep

Page: 13 / 36

1. 2-colour indicator light
Constant temperature function
；
Red LED
Anti-Legionella function, Red LED (6/7) flashes
Shutdown and power on function, Green LED
2. STANDBY button
3. “-“button
4. Temperature display
5. “+“button
6. Mode selection button (Reservation mode/ constant temperature / ECO mode
7. Count down appointment mode. Red LED(6) light up
During the heating stage, the decimal point in the lower right corner of the LED digital tube will flash
and display until the set temperature is reached, the decimal point goes out.
If the temperature drops ,for example after hot water has been used ,it automatically starts to heat
water again and the decimal point will flash again.
Press the to activate to the “smart” function. The corresponding LED indication(7)will light up.
If you want to adjust the temperature manually,you will need to turn o ff the smart function.
9
TIBER B 3
/Appointment.
Can change the modes according to press the button.