Supplied By www.heating spares.co Tel. 0161 620 6677
4
1. General information
It is law that your Ferroli TEMPRA central heating boiler be installed by a competent person in accordance
with the Gas Safety (Installation and Use) Regulations.
2. Description
The Ferroli TEMPRA is designed to supply central heating and, via an indirect cylinder, stored hot water.
Once the pilot has been lit and the control thermostat set, the boiler will function automatically in response
to the control thermostat and any external controls eg programmer, room thermostat, cylinder thermostat,
which may be fitted.
3. Gas leaks or faults
If gas leak or fault is suspected, always turn off at the electrical supply and, in the case of a gas leak, isolate
the gas supply. Consult the local region of British Gas PLC or your service engineer, quoting the name and
G.C. Number (see front page).
4. Precautions
1. If the boiler is istalled in a compartement, do not use that compartement for storage eg of food.
Always keep any purpose provided ventilation clear of obstruction.
2. Check that the flue terminal, outside the house, is clear of obstruction, from time to time.
3. Do not hang clothes, etc. over the boiler.
4. Always mantain minimum clearances from the boiler, for safe operation and access for servicing.
5. Lighting
1 - Before lighting check heating system is pressurised to min 1 bar.
2 - Ensure electric, gas and water are turned.
3 - Set any room thermostat to a high setting.
4 - Set boiler thermostat "A" to max.
5 - Boiler will begin firing sequence.
6 - Pilot burner will automatically ignite and after ignition of the pilot burner, the main burner will ignite.
TEMPRA