25
DIMENSIONAL DATA
Description of the components
Minimum space required for operation
To correctly install the unit, comply with the measurements for
the free area that must be left around the machine, as shown in
the figure.
This will ensure good air circulation, allow the unit to operate cor-
rectly and facilitate future maintenance work.
The distances must be doubled if the unit is to be installed in a
pit.
NOTE. Allow for an uncluttered area of not less than 2.5
meters above the unit.
1000
1000
1000
E
Modello
50-80
90-100
115-200
E [mm]
1600
2000
1 -
Access panel to electric panel’s power section
2 -
Access panel to compressor compartment
3 -
Vibration damper fixing holes (4 pcs)
4 -
Coil protection grilles (accessory)
5 -
ø 65 mm lifting holes
6 -
ø 22 mm input hole for accessory cables
7-
ø 60 mm hole for electric power supply input
8 -
Access panel to pump compartment
N
I
R
E
T
A
W
R
O
T
A
R
O
P
A
V
E
T
U
O
R
E
T
A
W
R
O
T
A
R
O
P
A
V
E
MOD.
50÷115
130÷180
200
WATER
CONNECTIONS
IN
2"M
3" VIC
4" VIC
OUT
Position of condensate drain
The condensate tray (if present) must have a suitable drain trap to prevent spilling of water during operation.
6
8
94
Ø 12.7
6
8
94
Ø 12.7
EVAPORATOR
WATER IN
EVAPORATOR
WATER OUT
Note: Water connections do not allow external connec-
tion to the sutside of the unit.
