Owner’s & Installation manual
17
Cod. 3QE46680 - Rev. 00 - 01/2021
EN
8. THE OPERATING FLOW DESCRIPTION OF THE WEEKLY-TIMER CENTRAL CONTROLLER
8.1 How to set the running status of the air conditioner?
Under the main interface
Fig.8-1
1. Press
Set
to enter the setting status interface of single air
conditioner. Press the button repeatedly to select Single and All
alternately, display “Set”.
If you select Single, press
to select one.
3. Press
to select running mode: automatic, cooling, heating, air
supply, dehumidification, or shutdown. If you select “Shutdown” mode,
press
to send shutdown command, finishing shutdown setting.
4. If you select the cooling or heating mode, press
Add Reduce
to adjust the temperature (the scope is within 17-30 degree).
No temperature adjustment for other modes.
5. Press Fan to regulate wind speed, which can be selected among
automatic speed, low speed, middle speed and high speed.
6. Press
Swing
to open or close swing.
7. Press
Confirm
to save the above setting and send to the
corresponding air conditioner, finally finish setting.
2. Selecting “All” indicates to set the running status of all air
conditioners, and “All” is displayed. Selecting “Single”displays the
address of the air conditioner; for example, if the air conditioner
whose address is 12 is selected, “12#” is displayed.