background image

8

GENERAL FEATURES

Options

The controller flexibility and the big number of options available 

allow to get, for each model, a lot of different configurations that 

integrate inside the heat pump many components of the plant 

and allow to realize compact and tested installations.

In order to select the right configuration it is necessary to define 

the type of plant to which the heat pump will be connected, both 

for what concerning the heating and cooling circuits, and for 

what concerning the domestic hot water management.

Not reversible heat pump (IH) without options

Reversible heat pump (IP) without options

Version

VD - Desuperheater version

Allows to recover a part of the available heating power (and otherwise not used 

during cooling operating mode) for the domestic hot water production.

Acoustic

setting up

AS - Low noise acoustic setting up

Allows to reduce the noise produced by the unit by means of the refrigerant 

circuit vane acoustic insulation and sound jackets on the compressors.

Plant side

flow rate

management

Pump

(standard, high head or modulating)

Allows the circulation of the water on the plant side.

With the modulating pump is possible to control the flow rate in order to keep 

constant the temperature difference between inlet and outlet.

Source side

flow rate

management

Pump

(standard, high head or modulating)

Allows the circulation of the water on the source side.

With the modulating pump is possible to control the flow rate in order to keep 

constant the temperature difference between inlet and outlet.

2 way valve

Modulates the water flow rate on the source side when the water circulation is 

assured by an external pump.

Domestic hot water

production

3 way valve

Allow to divert the hot water produced by the heat pump from the heating circuit 

to the domestic hot water circuit.

Passive cooling

Allows to use the source to cool down the plant water without activating the 

compressor.

Soft starter

Reduces the compressor start current.

Option "Version" : “VD - Desuperheater version"

Summary of Contents for HMW 30.1 Series





























Reviews: