EGEA
90LT - 120LT
cod. 3541T580 - Rev. 00 - 12/2019
80
EN
5.2 Wall mounting
The product must be installed on a solid wall that is not subject
to vibrations. For securing choose the most suitable type of ex-
pansion plug according to the specific wall type.
Drill as shown in fig. 10.
Hook the boiler with the special fastening bracket (fig. 11).
71
1 = model 90
963 = model 120
fig. 10 - Drilling
fig. 11 - Wall mounting
5.3 Aeraulic connections
In addition to the spaces indicated in 5.1, the heat pump.re-
quires adequate air ventilation.
Create a dedicated air channel as indicated in fig. 12.
Internal
compartment
Exterior
fig. 12 - Example of air outlet connection
Install each air channel, making sure:
•
It does not weigh down on the equipment.
•
It allows maintenance operations.
•
It is adequately protected to prevent the accidental intrusion
of materials inside the equipment.
•
The connection to the outside must be done with suitable,
non-flammable piping.
•
The total equivalent length of the extraction pipes plus the
Summary of Contents for EGEA 120LT
Page 2: ......
Page 7: ...EGEA 90LT 120LT 7 cod 3541T580 Rev 00 12 2019 IT 3 1 Dati dimensionali fig 3 fig 4 fig 5 fig 6...
Page 41: ...EGEA 90LT 120LT 41 cod 3541T580 Rev 00 12 2019 ES 3 1 Medidas fig 3 fig 4 fig 5 fig 6...
Page 77: ...EGEA 90LT 120LT 75 cod 3541T580 Rev 00 12 2019 EN 3 1 Dimensional data fig 3 fig 4 fig 5 fig 6...