DISPLAY UTILITY
12
2.3 Compatible unit control boards
To check the software compatibility it is necessary to turn off and restart the heating unit.
The unit's display will show of a range of information including the software version installed.
2.3.1 model O100
(versions R5.0 and later)
:
2.3.2 model L023
(versions R5.0 and later)
:
2.3.3 model N025
(versions R1.3 and later)
:
Control boards L023 and N025 have two powerline communication connectors; either connector can be used for the connection of the UTILITY
display.
Two UTILITY displays cannot be connected to the same board.
2.4 UTILITY display settings
When the UTILITY display is started, the FERROLI logo will appear for a few seconds. Press the areas marked by the dotted line to access
special settings for adjusting the display contrast, lighting and setting of the remote ambient sensor.
P1
P2
P4