5
2.1
ESS Battery connection
1.
Cut of the ring terminals from the premade battery cables
included with the ESS Battery Controller.
2.
Poke holes in the multi grommets and feed Bat+, Bat- and PE
cables through the smaller grommets.
3.
Attach isolated ferrules and connect to the cables to the
following terminals:
4.
Make sure that all terminals are tightened to 2.5 Nm, use a
torque wrench.
5.
Remove the cable grommet for the RJ45 cable, poke a hole,
cut it open along one side and attach it around the
communication cable.
6.
Connect the communication cable from the ESS Battery to
the outer p
ort, “CAN 2”:
7.
The ESS Battery is now connected!
