background image

Not for 

Reproduction

4

ferrismowers.com

The safety alert triangle (

) in text signifies important

cautions or warnings which must be followed.

Operating Safety

Congratulations on purchasing a superior-quality piece of

lawn and garden equipment. Our products are designed and

manufactured to meet or exceed all industry standards for

safety.
Do not operate this machine unless you have been trained.

Reading and understanding this operator’s manual is a way to

train yourself.
Power equipment is only as safe as the operator. If it is

misused, or not properly maintained, it can be dangerous!

Remember, you are responsible for your safety and that of

those around you.
Use common sense, and think through what you are doing.

If you are not sure that the task you are about to perform can

be safely done with the equipment you have chosen, ask a

professional: contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety information

you need to be aware of BEFORE you operate your unit as

well as DURING operation.
Safe operating techniques, an explanation of the product’s

features and controls, and maintenance information is

included to help you get the most out of your equipment

investment.

Be sure to completely read the Safety Rules and Information

found on the following pages. Also completely read the

Operation section.

Children

Tragic accidents can occur with children. Do not allow them

anywhere near the area of operation. Children are often

attracted to the unit and mowing activity. Never assume that

children will remain where you last saw them. If there is a risk

that children may enter the area where you are mowing, have

another responsible adult watch them.

Slope Operation

You could be seriously injured if you use this unit on too

steep of a slope. Using the unit on a slope that is too steep

where you do not have adequate footing and unit traction

(and control) can cause you to lose control and possibly slip

and fall or roll the unit over.
Always mow across slopes, not up and down (you could slip

and fall.)
Also, note that the surface you are on can greatly impact your

ability to safely operate this machine. Wet grass or soft soil

can seriously affect your footing and traction of the unit. Do

not operate on slopes that are slippery, wet, or have soft soil.

Summary of Contents for 5901736

































Reviews: