FERRI T380D left Use And Maintenance Manual Download

Page: 31 / 139

Rev. 1.0

T380D-T430D

SAFETY RULES

02-T

abella Pittogrammi (ISO)

DESCRIPTION OF THE DECALS

Use the required personal protection equipment.

Keep at a distance from: PTO transmission shaft; Do not perform any maintenance and/or

inspection operations when the power takeoff is switched on.

Risk of crushing and cutting the hands. Do not put your hands near the moving parts of the
machine.

1801378

Coupling point for lifting the machine. To lift the machine, attach hooks to the machine
exclusively in the points indicated.

Risk of falling of lifted parts of the machine. Do not stand below the machine or in its vicinity
during the work phases.

Do not, for any reason, get in between the tractor and the machine with the engine running
and/or the power takeoff switched on.

Ensure that the flails and the other parts of the machine are completely stopped before

approaching.

To handle the machine with a fork-lift truck, use only the points indicated.

Grease points. Carry out routine maintenance every 8 working hours

(see Chapter 7).

G I R I

R. P. M.

T O U R S

D R E H E Z A H L

M A X . 5 4 0

Indicates the direction of rotation and the number of revolutions (540 rpm) of the

tractor power takeoff.

Summary of Contents for T380D left












































































































































Search results

Summary of Contents for T380D left

Reviews:

Related manuals for T380D left

Brands by name

Popular brands

FERRI T380D left, Use And Maintenance Manual

Search results

Summary of Contents for T380D left

Reviews:

Related manuals for T380D left

Brands by name

Popular brands